Traditional current transducers rely on heavy iron cores, limiting their size, frequency response, and ease of installation. The FRC series replaces the bulky core with a lightweight, flexible coil based on the Rogowski principle. It retains the high accuracy of a conventional current transformer while breaking through the constraints of size, bandwidth, and mounting. By pairing the coil with your own integrator or amplifier, you obtain a wide-range, highly linear output from ampere to hundreds of kiloamperes.
2. Why Choose FRC?
Wide Range: One coil covers everything from a few amperes to hundreds of kiloamperes.
High Linearity: ±0.1 % of reading from 10 % to 100 % of range.
Broad Bandwidth: Flat frequency response from 10 Hz to 10 MHz—perfect for harmonics, transients, and DC ripple.
Coreless Design: No saturation, no hysteresis loss, constant 90° phase shift—measurement remains pure.
Non-Intrusive: The coil draws no power and generates no heat; open-circuit operation is completely safe.
Flexible Installation: Six lengths and six inner diameters to choose from; a quick-lock bayonet fastener lets you wrap the coil around large or awkwardly shaped conductors—even in tight spaces.
3. Typical Applications
Laboratory precision measurements with oscilloscopes and power analyzers
Grid harmonics and transient monitoring—up to the 50th harmonic clearly visible
Ultra-high-current monitoring for steel arc furnaces and electrolytic cells
Power-quality and power-control systems—real-time feedback for SVG, APF, UPS
DC-ripple testing in PV converters and EV chargers
Relay protection—fast, reliable, no false trips
4. Product Details at a Glance
Coil
Lengths: 210 mm / 350 mm / 420 mm / 510 mm / 600 mm / 800 mm
Inner diameters: 60 mm / 103 mm / 125 mm / 155 mm / 180 mm / 245 mm (±10 %)
Cross-section: 6.5 ±0.2 mm / 8 ±0.2 mm / 10 ±0.2 mm
Output: 40 mV / 80 mV / 100 mV per 1000 A @50 Hz (RMS)
Accuracy Class: 1.0 (calibration with integrator/amplifier and load impedance required)
Conductor-position error: ≤ ±2 %
External field influence: ≤ ±2 %
Operating temperature: –20 °C to +75 °C
Storage temperature: –30 °C to +75 °C (room temperature recommended for long-term storage)
5. In Summary
Whether you are measuring milliamps in the lab or hundreds of kiloamperes on the factory floor, the FRC series Rogowski coil delivers rock-solid results in a feather-light package. Leave the complexity to the coil and give simplicity back to the engineer—that is the promise of FRC.
Focusing on the Indian Market: An Analysis of Current Transformer Selection and DC Leakage Detection Solutions for PV Systems, EV Charging Stations, and Industrial Applications.
RCT ring current transformer, 5A output, 0.5 level accuracy, used for photovoltaic, data center, and street light leakage monitoring, industrial grade supplier.
The SDH series window type current transformer, as a high-precision component for low voltage and energy meters, is compatible with global power frequencies with a single model, ensuring energy monitoring and energy efficiency management.
HYCA leakage protection residual current sensor (current sensor) offers full current sensitivity and easy integration, outperforming hall sensors—ideal for motor drive and industrial automation.
