A-D5T series hall effect current Transmitter is an Closed loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of AC or pulsed currents.
Type | A-D5T-10A | A-D5T-20A | A-D5T-30A | A-D5T-50A | A-D5T-100A | Unit |
Rated current(Ipn AC) | 10 | 20 | 30 | 50 | 100 | A |
Measure range(Ip AC) | 0—12 | 0—24 | 0—36 | 0—60 | 0—120 | A |
Rated output(Io DC) | @Ip=±Ipn AC 4~20±1% | mA | ||||
Supply voltage | +12~+32V | V | ||||
Power Consumption | +35+ Io | mA | ||||
Zero current | @Ip=0 4±0.1 | mA | ||||
Offset drift | @ -40~+85℃ ≤±0.005 | mA /℃ | ||||
Output drift | @ -40~+85℃ ≤±0.005 | mA /℃ | ||||
Linearity | @Ip=0-±Ipn ≤0.5 | %FS | ||||
Response time | ≤300 | ms | ||||
Galvanic isolation | @ 50HZ,AC,1min 3 | KV | ||||
Bandwidth | 20~20000 | HZ |
Dimensions
Mechanical dimension(for reference only) | Note |
![]() |
![]() |
General date | Value | Unit |
Operating temperature(TA) | -40 to +85 | ℃ |
Storage temperature(TS) | -40 to +125 | ℃ |
Mass(approx) (M) | 93 | g |
Standards
UL94-V0.
EN60947-1:2004
IEC60950-1:2001
EN50178:1998
SJ 20790-2000
You can get a beautiful gift by interacting with us in the following ways
HEYI © All Rights Reserved.