LD1 series DC leakage current sensor is a series of new device developed according to principle of electromagnetic induction. Its low current is stable. It is highly insulating between its primary coil and secondary coil. This sensor is used to measure current of signal system, circuit, and leakage monitoring system, as well as to measure current difference.
Type | LD1-10mA | LD1-20mA | LD1-30mA | LD1-50mA | LD1-100mA | Unit |
Rated current(Ipn) | ±10 | ±20 | ±30 | ±50 | ±100 | mA |
Measure range(Ip) | ±12 | ±24 | ±36 | ±60 | ±120 | mA |
Rated output | @Ip=±Ipn ±5±1% | V | ||||
Supply voltage | ±12,±15 | V | ||||
Power Consumption | <25 | mA | ||||
Offset voltage | @Ip=0 ±50 | mV | ||||
Offset drift | @ -40~+85℃ ≤±1.5 | mV/℃ | ||||
Output drift | @ -40~+85℃ ≤±1 | mV/℃ | ||||
Linearity | @Ip=0-±Ipn ≤1 | %FS | ||||
Response time | @50A/μS, 10%-90% ≤50 | μs | ||||
Galvanic isolation | @ 50HZ,AC,1min 2.5 | KV |
Dimensions
Mechanical dimension(for reference only) | Note |
1. All dimensions are in mm. 2. General tolerance ±1mm. 3. Elucidation: 1:+15V 2:–15V 3:V0UT 4:NC |
|
General date | Value | Unit |
Operating temperature(TA) | -40 to +85 | ℃ |
Storage temperature(TS) | -40 to +125 | ℃ |
Mass(approx) (M) | 65 | g |
Accuracy test
Characteristic of Output Noise Voltage | Input Current-Output Voltage | |||
Noise Voltage |
Standards
UL94-V0.
EN60947-1:2004
IEC60950-1:2001
EN50178:1998
SJ 20790-2000
You can get a beautiful gift by interacting with us in the following ways
HEYI © All Rights Reserved.